Coronial
NTcommunity

Inquest into the death of Road Death 22 of 2024

Demographics

44y, male

Date of death

2024-05-16

Cause of death

Crush injury of the torso sustained in a cement truck rollover collision

AI-generated summary

A 44-year-old experienced cement truck driver died from crush injuries sustained in a rollover accident on 16 May 2024 near Borroloola, NT. The truck was travelling too fast for a right-hand turn from Bing Bong Road onto Batten Road, causing the heavily laden cement mixer to tip. The vehicle's high centre of gravity when loaded, combined with excessive speed for the turn conditions, contributed to the rollover. The driver was partially ejected and died despite immediate CPR resuscitation attempts at the health clinic. This case highlights the risks of heavy vehicle operation with loads that shift during manoeuvres, and the importance of speed management on curves regardless of driver experience.

AI-generated summary and tagging — may contain inaccuracies; refer to original finding for legal purposes. Report an inaccuracy.

Contributing factors

  • Excessive speed for the road conditions and turn
  • High centre of gravity of fully laden cement mixer
  • Shifting load of wet concrete during manoeuvre
  • No right turn bay at the intersection
  • Design characteristics of cement agitators creating fluid centre of gravity when loaded
Full text

Source and disclaimer

This page reproduces or summarises information from publicly available findings published by Australian coroners' courts. Coronial is an independent educational resource and is not affiliated with, endorsed by, or acting on behalf of any coronial court or government body.

Content may be incomplete, reformatted, or summarised. Some material may have been redacted or restricted by court order or privacy requirements. Always refer to the original court publication for the authoritative record.

Copyright in original materials remains with the relevant government jurisdiction. AI-generated summaries and tagging are for educational purposes only, may contain inaccuracies, and must not be treated as legal documents. We welcome feedback for correction — report an inaccuracy here.